WESTERN RED CEDAR
BEVEL SIDING

Elite Solid Bevel Siding

Elite Solid Bevel siding is a consistent and superior quality of Western Red Cedar and is available in three grades:

Clear VG (graded for the smooth face)
AYE (graded for the smooth face)
AYE TEX (graded for the rough face)

Elite Clear Finger Joint Bevel Siding

Elite Clear Finger Joint Bevel Siding is also available in four grades:

Clear VG (graded for the smooth face)
Clear VG TEX (graded for the resawn face)
AYE (graded for the smooth face)
AYE TEX (graded for the rough face)

Pre-Sanded Face

Elite enhances the finish of its bevel siding by face sanding each board to further enhance its appearance and coating adhesion.

Unfinished	Finished – Lava Gray

Moisture Management

To improve the lifespan of Elite Western Red Cedar siding and trim, it is recommended that a rainscreen layer or drainable house wrap (like Slicker® Classic from Benjamin Obdyke shown below) be applied to exterior walls prior to installation of the siding to facilitate drainage and drying of any moisture on the backside of the siding.

Traditional aesthetic appeal

When properly finished and maintained, Western Red Cedar is an ideal choice for exterior siding. WRC combines its traditional warm, aesthetic appeal with natural resistance to decay and attack from insects.

Photo courtesy of: Patrick Ahern Architects

Versatile and durable…

WRC siding from Elite can be used in wide range of architectural design projects ranging from traditional to contemporary styles. Proper finishing and installation adds to its natural longevity.

Photo courtesy of: Corey Fitzgerald Photography

Pre-finished Color Options

Elite Western Red Cedar is available in a wide variety of standard and custom color options. Elite has you covered with a great assortment of the most popular, on-trend exterior siding colors. All backed by 15 year limited finish warranty.

Extraordinary Selection of 15 Standard Solid Colors

Fifteen standard solid colors are available with primer plus one coat. These colors are finished upon order. All pre-finished color orders are coated with PPG machine applied coatings. (pre-primed front & back / finish coat to front face only). Please select one of our standard colors or provide a custom color that you are trying to match. Samples may be requested for your review before final approval and written sign off. Field touch up of all cuts and nail holes is required.

Note: Custom stain pre-finishing (Weathering Stain, Maximum Cedartone, or Semi-Transparent Stain) is not available for for this product.